Improve this doc
Get started with and

Get started with Samsung ARTIK 710 and Node.js

Introduction

In this guide we will build a simple Node.js web server project on a Samsung ARTIK 710. At its most basic, the process for deploying code to a Samsung ARTIK 710 consists of two major steps:

  • Setting up your Samsung ARTIK 710 with balenaOS, the host OS that manages communication with balena and runs the core device operations.
  • Pushing your Node.js project to the balena image builder, which pulls in all necessary dependencies and creates the container image for your application.

Once these steps are finished, your Samsung ARTIK 710 will download the container image, kick off your application, and begin sending logs to your balena dashboard!

What you will need

  • Samsung ARTIK 710 module mounted on a development board.
  • A 5VDC power supply (100-240V input), if you purchased the development kit you should have one included.
  • At least one of Wireless communication antennas, also provided as part of the development kit.
  • [optional] Ethernet cable, if you prefer to not connect over wifi.
  • A 4GB or larger SD card. The speed class of the card also matters - class 10 card or above is the way to go.
  • [optional] A tooth pick or small screw driver to set the boot switches.

Need help?

If you find yourself stuck or confused, help is just a click away:

  • The balenaCloud section of the forums is where our engineers address any issues you may be having with balena.
  • You can read more about our approach to support here.

Account setup

If you don't already have a balena account, make sure to sign up.

Adding an SSH Key

Balena uses git to push code from your computer to a dedicated repository. As part of the account creation process, you will be asked to add a public SSH key. The SSH key secures your connection to our server, letting us know you have the authority to make changes to the repository.

Note: You can click Skip to move past this step for now, but you will not be able to push code to your Samsung ARTIK 710 until you have added a public key to your account. This can be done at any time from the Preferences page on the dashboard.

If you have a public SSH key, simply paste it into the box provided and click Save Key:

You can also import your key from GitHub. If you choose this option, you will be asked to enter your GitHub username:

Don't have an SSH key?

If you are unfamiliar with SSH keys, we recommend you take a look at GitHub's excellent documentation. This will walk you through everything you need to create a key pair. Window's user? Be sure to check out these instructions.

Create an application

An application is a group of devices that share the same architecture and run the same code. When you provision a device, it is added to a specific application, but can be migrated to another application at any time.

To create an application, select the Samsung ARTIK 710 device type, select an application type, enter a name, and click Create new application:

Note: To create an application with multiple containers, you'll want to use the starter or microservices application type. The starter applications are full-featured and free for all users, with a limit of up to ten total devices across all starter applications.

This will take you to the dashboard for your newly created application, where you can manage your whole fleet of Samsung ARTIK 710s.

Add your first device

To connect with balena, your Samsung ARTIK 710 will need a balenaOS image that is configured for your device type, application, and network. Start by clicking Add device in your application dashboard:

For most applications, you will have the option to select a device type. By default, the device type you chose when you first created the application will be selected. Applications can, however, support any devices that share the same architecture, so you can choose another device type if needed.

After selecting a device type, you will see a list of available balenaOS versions. In general, the most recent version is recommended. You can also select whether you would prefer a Development or Production edition with the respective toggle:

Note: When you're first getting started, a Development image will be most useful, as it permits a number of testing and troubleshooting features. For production use, be sure to switch to a Production image. More details on the differences between Development and Production images can be found here.

A toggle is also used to select whether your network connection will be through Ethernet Only or with the option for WiFi + Ethernet. Selecting Wifi + Ethernet allows you to enter a WiFi SSID and WiFi Passphrase:

Clicking Advanced presents the option to select the rate at which your device checks for updates and the option to download just a configuration file (config.json) rather than an entire image:

Once you have finished your image configuration, click the Download balenaOS button. When the download completes, you should have a zipped image file with a name like balena-FirstApp-2.3.0+rev1-dev-v6.1.3.img.zip, where FirstApp is the name you gave your application on the dashboard.

The next step is to flash the downloaded image onto your SD card using Etcher, a simple, cross platform SD card writer and validator. Once you have Etcher installed, start it up. To give Etcher access to your SD card, your system may prompt you to grant administrative privileges.

To create a bootable balenaOS SD card follow these steps:

  1. Click Select image and find your application's balenaOS image file.
  2. If you haven't already done so, insert your SD card into your computer. Etcher will automatically detect it. If you have more than one SD card inserted, you will need to select the appropriate one.
  3. Click the Flash! button.

Etcher will now prepare a bootable SD card and validate that it was flashed correctly. This can take roughly 3 or more minutes depending on the quality of your SD card. You'll get a little ping when it's done, and Etcher will safely eject the SD card for you.

Note: You can burn several SD cards with the same image file and all the devices will boot and provision into your application's fleet. You can also disable the auto-ejecting or validation steps from the Etcher settings panel.

Provision your device

In order to get balenaOS up and running on your Samsung ARTIK 710, you need to first set it up to boot from your SD card rather than its internal eMMC memory. To do this, you need to set the SW402 dip switch to position 1:off, 2:off, 3:off, 4:on, and insert your SD card into the board, hint: The SD card slot can be found on the underside of the board near the Audio Jack.

Note: BalenaOS will completely write over the existing eMMC.

If you selected WiFi as your connectivity type, remember to attach the WiFi antennas before booting the board.

We can now insert the 5VDC power cable and flip the power switch labelled SW700, to the on position. We should now have some glowing LEDs on the underside of the board indicating a sign of life. Next we need to press and hold the SW400 POWER push button for 1 or 2 seconds, this starts the boot from the SD card. You should see the red POWER ON LED light up when it starts booting.

After a few seconds you should see your Samsung ARTIK 710 appear on the balena dashboard in a configuring state. If it still hasn't appeared after 1 or 2 minutes, double check your ethernet connection or that you entered the right WiFi credentials at download time. If you still can't get it online, contact us on support.

Your Samsung ARTIK 710 will now flash balenaOS onto the internal eMMC so that you can remove the SD card. This will take 2 or 3 minutes. Once it has finished it will shut itself down and you will see the device on the dashboard in a Post-Provisioning state. At this point you need to:

  1. Flip SW700 back to off position.
  2. Remove the SD card.
  3. Set SW402 dip switch to position 1:off, 2:off, 3:off, 4:off.

After all of that, we flip the SW700 back on and once again hold down the SW400 POWER button for a second or so. If all goes according to plan we should now have a freshly provisioned Samsung ARTIK 710 sitting in an IDLE state on our dashboard, ready and waiting to receive some code.

Now it's time to deploy some code!

Deploy code

Now that we have a device or two connected to a balena application, let's deploy some code and actually start building something.

A nice first project to get your feet wet is a simple Express.js web server which will serve a static page on port :80. All the project source code can be found here on GitHub.

To clone the project, run the following command in a terminal or your preferred git client:

$ git clone https://github.com/balena-io-projects/simple-server-node.git

Note: This project runs an application in a single container. If you would like to start with a multicontainer project, run git clone git@github.com:balena-io-projects/multicontainer-getting-started.git.

Once the repo is cloned, change directory into the newly created simple-server-node directory and add the balena git remote endpoint by running the command git remote add shown in the top-right corner of your application page:

$ cd simple-server-node
$ git remote add balena <USERNAME>@git.balena-cloud.com:<USERNAME>/<APPNAME>.git

Note: On other git clients there may be an alternative way to add a remote repository.

So now we have set up a reference in our local git repository (the one on our development computer) to the balena application remote repository. So when we push new changes to this remote repository it will get compiled and built on our servers and deployed to every device in the application fleet.

Warning: The balena git repository is not intended as a code hosting solution, and we cannot guarantee the persistence of data in balena git remotes.

Now to deploy this code to all device(s) in the application just run the command:

$ git push balena master

If you want to completely replace the source code of the application with a new source tree, you may need to force the push by running git push balena master --force, due to how git works.

Note: On your very first push, git may ask you if you would like to add this host to your list of allowed hosts. If the ECDSA key fingerprint matches SHA256:NfwmqnKId5cx1RWpebbEuuM87bCJbdyhzRnqFES9Nnw, you are pushing to the right place. Type 'yes' to continue.

You'll know your code has been successfully compiled and built when our friendly unicorn mascot appears in your terminal:

This means your code is safely built and stored on our image registry. It should only take about 2 minutes to build your code and subsequent builds will be quicker because of build caching.

Your application will now be downloaded and executed by all the devices you have connected in your application fleet. You may have to wait about 6 minutes for the first push... So time for more tea, but don't worry, all subsequent pushes are much, much faster due to Docker layer sharing. You can see the progress of the device code updates on the device dashboard:

You should now have a node.js web server running on your device and see some logs on your dashboard. If you go to the Actions page for your device, you can enable a public URL, this URL is accessible from anywhere in the world.

If you follow the URL, you will be served a page with some additional balena learning resources and next steps. Alternatively, you can point your browser to your device's IP address.

Next steps

  • Learn more about the Dockerfile that is used to build your application.
  • Build an application that uses multiple containers.
  • Get to know the web terminal, which can be used to SSH into your application containers and the host OS.
  • Try out local mode, the most efficient way to rapidly develop and test your balena application.

Example projects

These example projects will give you an idea of more things that can be done with balena:

SORRY! we currently don't have any other Node.js projects for the Samsung ARTIK 710. How about submitting one to us at hello@balena.io?

Enjoy Balenafying All the Things!